|
One Step Mounting and
Laminating with
Professionally Edged Sides
Go From unfinished
To Impressive
Mounted prints
Gallery style displays
For ProSeal
and Phoenix Laminators
Ready to Display
Accent Pouch Boards have a stylish laminate edge on all sides.
With our unique hinged laminate, just place your print on
the pouch board and cover with laminate. Process like
any pouch board. Make high-end displays for:
Hotel Lobbies
Corporate Events
Bank Signs
Point of Purchase Signs
Menu Boards and more
Features
Plaque-style Finished boards
Sizes from 8"x10" to 36"x48"
Choose
from black, white, blue and red edges
Gloss and Matte laminate Finishes
For Boards
from ¼ for ProSeal to ½ inch thick
Board Sizes
We offer Accent Boards both in their nominal
size as well as a 1" smaller on each side for those
who desire a flush mounted finish. Accent Mount
Boards are generally finished with the print trimmed
flush to the edge of the board. This gives a
plaque look. Some people find it easier to
trim their paper print after mounting because that
can take less time than precisely aligning their
print on the board.
Professional Adhesives
Our heat adhesives are low temperature.
We leave the adhesive covered with a crack and peel
liner for cleanliness. They can be used in all heated roll laminators.
Easy to
Display Accent Mounts
are light weight and easy to hang and display. We have
3M Mounting squares which remove cleanly from walls,
self-stick easels for desk-top displays and hardware.
|
How to use Accent Mount Boards
|
 1.
Place your print on edged board and
cover with hinged laminate sheet. If
you want a flush mount insure your print
overhangs on all sides.
 2.
Smooth laminate and insure
hinged laminate edge is about an inch from
the leading edge of the board and the
laminate flap is underneath the edged Accent
board.
 3.
Insert the Pouch board in the laminator
leading edge first. (Set the
temperature to 250 degrees & the speed
1'/minute.
 4.
To trim, flip your print over on a cutting
mat and trim you print and laminate in the
same cut. The hard edge makes it easy
to trim.
 5.
To display, use either our foam board
hanging hooks, 3M mounting squares or Velcro
fasteners for easy and fast displays.
|
