|
Polar Pouch Boards
Web Promotions
Orders over $250 Ship UPS Ground FREE!
Boards up to 32"x40" Continental USA only
Polar Cold Pouch Boards
The 'all in one' Mounting & Laminating
Board
 Cold
Pouch Boards are cold self-stick adhesive coated boards with
attached laminate film. These are used to mount and
laminate prints in one process without any set-up for
fast and professional results. Patent Applied.
Polar Pouch Boards are used
for the most popular
displays
Over-laminate
prints to protect you prints from moisture and
handling. Lamination also enhances
prints. Choose gloss film to make colors 'pop'
or matte finishes to minimize glare.
For outdoor displays we recommend out corrugated
plastic pouch boards. Corrugated
plastic has flutes which work with Step-Stakes to
place in ground for short-term requirements.
For high end displays we have Gator Cold Pouch
Board. Gator is rugged and holds up
to repeated handling and transport. It is also
very flat and does not bow.
Cold Pouch Boards feature
Available
in foam, gator and corrugated plastic
Choose from gloss or matte finishes
¼" Leading edge where film is attached to board
One piece construction for ease of use
Use by hand or with any laminator
Easy to
Display Cold Pouch
Boards are light weight and easy to hang and display.
We have 3M Mounting squares which remove cleanly from walls,
self-stick easels and hanging hardware.
|
How to use Polar Pouch Boards
|
 1.
Lift
over-laminate film from board and place your print
on the board.
2. Holding film
up or lay film forward over the top roller (shown),
process print through laminator to adhere film to
the surface of your print.
 3.
Raise your
laminated print off the board and remove coversheet
to expose adhesive on the board.
 4.
Roll your laminated print down
either through a laminator or by hand.
Display your mounted and laminated print and trim if necessary.
Attach display hardware and display
|
